Programme: All

As a starting material for the production will be supplied and used already cleared in other places timber - pine, spruce, spruce, deciduous wood.
The designed workshop will allow the processing of 250 cubic meters of timber per year in a single-shift mode.
In the workroom is planned installation of:
Shaped circular saw blade - with roller carriage;
- Form mass 3,20x0,38m.
- slope of saws 45-90 gr.
- Cutting height according to the slope 80 / 55mm.
  Feeder for milling machine - roller;
    - different feed rates
 Five-axis woodworking machine - circular saw, abriquette, stripe, milling cutter, borabar - set with all necessary accessories for correct and safe operation ;;
Fine milling and engraving machine (router milling machine);
- stepper motor for axial displacement
- air-cooled spindle;
- Vacuum table, with the possibility of mechanical clamping.
- automatic pre-programmed control system;
 Calibrating grinding;
   - height of the workpiece - 5 - 300 mm.
   - workpiece width - up to 1.00 m
Lathe for wood;
- Depth of copy - up to 50mm.
- Copy length - up to 1100mm.
- Distance between centers - up to 1.5m.
Apparatus for gluing details (carpentry);
- Height - up to 2.1m
- width - 3.0m
     Aspiration system
  Optimal is the option - the collection of the waste from each of the machines is carried out with the installation of a mobile aspiration system (local dust extractors). The local dust extractors are designed to accept wood chips (waste) obtained from the operation of a wide range of woodworking machines (abribhet, circular saw, band saw, strihmus, etc.). Each dust collector is equipped with:
- Fan section
- Suction flexible hose, set with tips.
- Collecting bag.
High filtration filter pocket
- Electric motor directly coupled.